Cymraeg | Contact Us | About Us | Accessibility | Help
Advanced search
Ofqual Logo DfES Logo CCEA Logo
The Register of Regulated Qualifications

View Qualification : EAL Level 3 NVQ Extended Diploma in Fabrication and Welding (QCF)

Qualification
Qualification Number
600/1829/X
Title
EAL Level 3 NVQ Extended Diploma in Fabrication and Welding (QCF)
Awarding Organisation
Excellence, Achievement & Learning Limited
Fees Price List Url
Qualification Type
QCF
Qualification Sub Type
None
Qualification Level
Level 3
Qualification Sub Level
None
EQF Level
Level 4
Regulation Start Date
21-Apr-2011
Operational Start Date
01-May-2011
Operational End Date
Certification End Date
Offered In England
Yes
Offered In Wales
Yes
Offered In Northern Ireland
Yes
Assessment Language In English
Yes
Assessment Language In Welsh
No
Assessment Language In Irish
No
SSA
4.1 Engineering
Purpose
D. Confirm occupational competence and/or 'licence to practice'
Sub Purpose
D1. Confirm competence in an occupational role to the standards required
Total Credits
151
Min Credits at/above Level
101
Minimum Guided Learning Hours
516
Maximum Guided Learning Hours
1123
Diploma Guided Learning Hours
516
Barring Classification Code
ZZZZ
Overall Grading Type
Pass
Assessment Methods
Portfolio of Evidence
Exemptions
Structure Requirements
The learner must achieve at least 151 credits in order to achieve this qualification. 15 credits from mandatory unit group A, at least 109 from following a pathway 1 - 6 the final 27 credits should be achieved from either M1 or M2
The awarding organisation states that this qualification is appropriate for use in the following age ranges.
Age Ranges
Pre-16 : No; 16-18 : Yes; 18+ : No; 19+ : Yes
Further information
This does not imply that eligibility for funding has been agreed for these age ranges.
For further information on the funding of 14-19 qualifications offered in England, please refer to the DFE Section 96 website.
For further information on the funding of 19+ qualifications offered in England, please refer to the SFA website.
For further information on funding in Wales, visit the DAQW website.
For further information on funding in Northern Ireland, visit the DELNI and DENI website.
When undertaking a qualification that does not appear on the governments' lists as eligible for funding for specific age ranges, users must be aware of the legal requirements around activities undertaken by learners of specific ages.
Compound Group
OG
Label
OG
Name
Overarching Group
Group Requirements
The learner must achieve at least 151 credits in order to achieve this qualification. 15 credits from mandatory unit group A, at least 109 from following a pathway 1 - 6 the final 27 credits should be achieved from either M1 or M2
Minimum Credit Value
151
Maximum Credit Value
Minimum Subcomponents
3
Maximum Subcomponents
Mandatory Within Group
Yes
Pathway Reference
Unit Group
A
Label
A
Name
Mandatory Units
Group Requirements
The learner must complete all 3 units in order to achieve 15 credits
Minimum Credit Value
15
Maximum Credit Value
15
Minimum Subcomponents
3
Maximum Subcomponents
3
Mandatory Within Group
Yes
Linked Unit
Complying with statutory regulations and organisational safety requirements
Linked Reference Number
Not Set
Unit
Unit Reference Number
A/601/5013
Title
Complying with statutory regulations and organisational safety requirements
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
35
Unit Credit Value
5
Linked Unit
Using and interpreting engineering data and documentation
Linked Reference Number
Not Set
Unit
Unit Reference Number
Y/601/5102
Title
Using and interpreting engineering data and documentation
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
25
Unit Credit Value
5
Linked Unit
Working efficiently and effectively in engineering
Linked Reference Number
Not Set
Unit
Unit Reference Number
K/601/5055
Title
Working efficiently and effectively in engineering
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 3
Unit Sub Level
None
Guided Learning Hours
25
Unit Credit Value
5
Compound Group
M1
Label
M1
Name
Mandatory Choices 1
Group Requirements
The learner must achieve at least 27 credits from the unit group
Minimum Credit Value
27
Maximum Credit Value
Minimum Subcomponents
1
Maximum Subcomponents
Mandatory Within Group
No
Pathway Reference
Unit Group
A
Label
A
Name
Unit Group A
Group Requirements
The learner must choose at least 3 units from this group in order to achieve at least 27 credits IMPORTANT NOTE from units owner ref PEO2- 004/032/061 only 1 unit may be selected
Minimum Credit Value
27
Maximum Credit Value
Minimum Subcomponents
3
Maximum Subcomponents
Mandatory Within Group
Yes
Linked Unit
Carrying out aircraft detail fitting activities
Linked Reference Number
Not Set
Unit
Unit Reference Number
A/600/5856
Title
Carrying out aircraft detail fitting activities
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
64
Unit Credit Value
14
Linked Unit
Preparing and using CNC fabrication machinery
Linked Reference Number
Not Set
Unit
Unit Reference Number
A/600/5887
Title
Preparing and using CNC fabrication machinery
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
64
Unit Credit Value
14
Linked Unit
Maintaining electrical equipment/systems
Linked Reference Number
Not Set
Unit
Unit Reference Number
A/600/5923
Title
Maintaining electrical equipment/systems
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
68
Unit Credit Value
15
Linked Unit
Assembling pattern, model and engineering woodwork components
Linked Reference Number
Not Set
Unit
Unit Reference Number
A/600/5937
Title
Assembling pattern, model and engineering woodwork components
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
64
Unit Credit Value
14
Linked Unit
Producing and preparing molten materials for casting
Linked Reference Number
Not Set
Unit
Unit Reference Number
A/600/5954
Title
Producing and preparing molten materials for casting
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
64
Unit Credit Value
14
Linked Unit
Carrying out hand forging of engineering materials
Linked Reference Number
Not Set
Unit
Unit Reference Number
A/600/5968
Title
Carrying out hand forging of engineering materials
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
41
Unit Credit Value
9
Linked Unit
Preparing and using CNC milling machines
Linked Reference Number
Not Set
Unit
Unit Reference Number
D/600/5865
Title
Preparing and using CNC milling machines
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
64
Unit Credit Value
14
Linked Unit
Maintaining and testing process instrumentation and control devices
Linked Reference Number
Not Set
Unit
Unit Reference Number
D/600/5932
Title
Maintaining and testing process instrumentation and control devices
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
68
Unit Credit Value
15
Linked Unit
Installing aircraft mechanical fasteners
Linked Reference Number
Not Set
Unit
Unit Reference Number
F/600/5857
Title
Installing aircraft mechanical fasteners
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
61
Unit Credit Value
11
Linked Unit
Preparing and using milling machines
Linked Reference Number
Not Set
Unit
Unit Reference Number
F/600/5860
Title
Preparing and using milling machines
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
68
Unit Credit Value
15
Linked Unit
Maintaining fluid power equipment
Linked Reference Number
Not Set
Unit
Unit Reference Number
F/600/5874
Title
Maintaining fluid power equipment
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
64
Unit Credit Value
14
Linked Unit
Preparing and using manual TIG or plasma-arc welding equipment
Linked Reference Number
Not Set
Unit
Unit Reference Number
F/600/5891
Title
Preparing and using manual TIG or plasma-arc welding equipment
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
68
Unit Credit Value
15
Linked Unit
Inspecting a motorsport vehicle during a competition
Linked Reference Number
Not Set
Unit
Unit Reference Number
F/600/5972
Title
Inspecting a motorsport vehicle during a competition
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
64
Unit Credit Value
14
Linked Unit
Producing mechanical assemblies
Linked Reference Number
Not Set
Unit
Unit Reference Number
H/600/5799
Title
Producing mechanical assemblies
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
68
Unit Credit Value
15
Linked Unit
Preparing and using CNC machining centres
Linked Reference Number
Not Set
Unit
Unit Reference Number
H/600/5866
Title
Preparing and using CNC machining centres
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
64
Unit Credit Value
14
Linked Unit
Cutting and shaping materials using thermal cutting equipment
Linked Reference Number
Not Set
Unit
Unit Reference Number
H/600/5883
Title
Cutting and shaping materials using thermal cutting equipment
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
64
Unit Credit Value
14
Linked Unit
Preparing and using manual gas welding equipment
Linked Reference Number
Not Set
Unit
Unit Reference Number
H/600/5897
Title
Preparing and using manual gas welding equipment
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
64
Unit Credit Value
14
Linked Unit
Finishing surfaces by applying treatments
Linked Reference Number
Not Set
Unit
Unit Reference Number
H/600/5964
Title
Finishing surfaces by applying treatments
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
41
Unit Credit Value
9
Linked Unit
Diagnosing and rectifying faults on motorsport vehicle systems _during competition_
Linked Reference Number
Not Set
Unit
Unit Reference Number
H/600/5978
Title
Diagnosing and rectifying faults on motorsport vehicle systems _during competition_
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
68
Unit Credit Value
15
Linked Unit
Carrying out maintenance activities on motorsport vehicle electrical equipment
Linked Reference Number
Not Set
Unit
Unit Reference Number
H/600/5981
Title
Carrying out maintenance activities on motorsport vehicle electrical equipment
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
68
Unit Credit Value
15
Linked Unit
Producing mechanical engineering drawings using a CAD system
Linked Reference Number
Not Set
Unit
Unit Reference Number
J/600/5794
Title
Producing mechanical engineering drawings using a CAD system
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
61
Unit Credit Value
11
Linked Unit
Producing aircraft detail assemblies
Linked Reference Number
Not Set
Unit
Unit Reference Number
J/600/5858
Title
Producing aircraft detail assemblies
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
64
Unit Credit Value
14
Linked Unit
Preparing and using grinding machines
Linked Reference Number
Not Set
Unit
Unit Reference Number
J/600/5861
Title
Preparing and using grinding machines
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
68
Unit Credit Value
15
Linked Unit
Preparing and using manual metal arc welding equipment
Linked Reference Number
Not Set
Unit
Unit Reference Number
J/600/5889
Title
Preparing and using manual metal arc welding equipment
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
68
Unit Credit Value
15
Linked Unit
Wiring and testing electrical equipment and circuits
Linked Reference Number
Not Set
Unit
Unit Reference Number
J/600/5908
Title
Wiring and testing electrical equipment and circuits
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
64
Unit Credit Value
14
Linked Unit
Forming and assembling electrical cable enclosure and support systems
Linked Reference Number
Not Set
Unit
Unit Reference Number
J/600/5911
Title
Forming and assembling electrical cable enclosure and support systems
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
65
Unit Credit Value
13
Linked Unit
Maintaining electronic equipment/systems
Linked Reference Number
Not Set
Unit
Unit Reference Number
J/600/5925
Title
Maintaining electronic equipment/systems
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
68
Unit Credit Value
15
Linked Unit
Producing composite mouldings using wet lay-up techniques
Linked Reference Number
Not Set
Unit
Unit Reference Number
J/600/5939
Title
Producing composite mouldings using wet lay-up techniques
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
64
Unit Credit Value
14
Linked Unit
Producing cast components by manual means
Linked Reference Number
Not Set
Unit
Unit Reference Number
J/600/5956
Title
Producing cast components by manual means
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
65
Unit Credit Value
13
Linked Unit
Assembling and testing fluid power systems
Linked Reference Number
Not Set
Unit
Unit Reference Number
K/600/5870
Title
Assembling and testing fluid power systems
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
64
Unit Credit Value
14
Linked Unit
Assembling and testing electronic circuits
Linked Reference Number
Not Set
Unit
Unit Reference Number
K/600/5917
Title
Assembling and testing electronic circuits
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
64
Unit Credit Value
14
Linked Unit
Wiring and testing programmable controller based systems
Linked Reference Number
Not Set
Unit
Unit Reference Number
K/600/5934
Title
Wiring and testing programmable controller based systems
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
68
Unit Credit Value
15
Linked Unit
Producing composite assemblies
Linked Reference Number
Not Set
Unit
Unit Reference Number
K/600/5948
Title
Producing composite assemblies
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
64
Unit Credit Value
14
Linked Unit
Preparing and using lathes for turning operations
Linked Reference Number
Not Set
Unit
Unit Reference Number
L/600/5859
Title
Preparing and using lathes for turning operations
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
68
Unit Credit Value
15
Linked Unit
Producing composite mouldings using pre-preg laminating techniques
Linked Reference Number
Not Set
Unit
Unit Reference Number
L/600/5943
Title
Producing composite mouldings using pre-preg laminating techniques
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
64
Unit Credit Value
14
Linked Unit
Fettling, finishing and checking cast components
Linked Reference Number
Not Set
Unit
Unit Reference Number
L/600/5960
Title
Fettling, finishing and checking cast components
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
61
Unit Credit Value
11
Linked Unit
Stripping and rebuilding motorsport engines _pre-competition_
Linked Reference Number
Not Set
Unit
Unit Reference Number
L/600/5988
Title
Stripping and rebuilding motorsport engines _pre-competition_
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
64
Unit Credit Value
14
Linked Unit
Preparing and using industrial robots
Linked Reference Number
Not Set
Unit
Unit Reference Number
M/600/5868
Title
Preparing and using industrial robots
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
64
Unit Credit Value
14
Linked Unit
Preparing and proving CNC fabrication machine tool programs
Linked Reference Number
Not Set
Unit
Unit Reference Number
M/600/5885
Title
Preparing and proving CNC fabrication machine tool programs
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
64
Unit Credit Value
14
Linked Unit
Producing electrical or electronic engineering drawings using a CAD system
Linked Reference Number
Not Set
Unit
Unit Reference Number
M/600/5904
Title
Producing electrical or electronic engineering drawings using a CAD system
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
61
Unit Credit Value
11
Linked Unit
Producing components by rapid prototyping techniques
Linked Reference Number
Not Set
Unit
Unit Reference Number
M/600/5949
Title
Producing components by rapid prototyping techniques
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
61
Unit Credit Value
11
Linked Unit
Producing and preparing sand moulds and cores for casting
Linked Reference Number
Not Set
Unit
Unit Reference Number
M/600/5952
Title
Producing and preparing sand moulds and cores for casting
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
64
Unit Credit Value
14
Linked Unit
Preparing and proving CNC machine tool programs
Linked Reference Number
Not Set
Unit
Unit Reference Number
R/600/5863
Title
Preparing and proving CNC machine tool programs
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
64
Unit Credit Value
14
Linked Unit
Producing platework components and assemblies
Linked Reference Number
Not Set
Unit
Unit Reference Number
R/600/5880
Title
Producing platework components and assemblies
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
64
Unit Credit Value
14
Linked Unit
Preparing and using manual MIG, MAG and other continuous wire welding equipment
Linked Reference Number
Not Set
Unit
Unit Reference Number
R/600/5894
Title
Preparing and using manual MIG, MAG and other continuous wire welding equipment
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
68
Unit Credit Value
15
Linked Unit
Assembling, wiring and testing electrical panels/components mounted in enclosures
Linked Reference Number
Not Set
Unit
Unit Reference Number
R/600/5913
Title
Assembling, wiring and testing electrical panels/components mounted in enclosures
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
64
Unit Credit Value
14
Linked Unit
Finishing surfaces by applying coatings or coverings
Linked Reference Number
Not Set
Unit
Unit Reference Number
R/600/5961
Title
Finishing surfaces by applying coatings or coverings
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
41
Unit Credit Value
9
Linked Unit
Forming and assembling pipework systems
Linked Reference Number
Not Set
Unit
Unit Reference Number
T/600/5855
Title
Forming and assembling pipework systems
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
64
Unit Credit Value
14
Linked Unit
Maintaining mechanical devices and equipment
Linked Reference Number
Not Set
Unit
Unit Reference Number
T/600/5869
Title
Maintaining mechanical devices and equipment
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
64
Unit Credit Value
14
Linked Unit
Using wood for pattern, modelmaking and other engineering applications
Linked Reference Number
Not Set
Unit
Unit Reference Number
T/600/5936
Title
Using wood for pattern, modelmaking and other engineering applications
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
68
Unit Credit Value
15
Linked Unit
Carrying out heat treatment of engineering materials
Linked Reference Number
Not Set
Unit
Unit Reference Number
T/600/5967
Title
Carrying out heat treatment of engineering materials
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
41
Unit Credit Value
9
Linked Unit
Stripping and rebuilding motorsport vehicles _pre-competition_
Linked Reference Number
Not Set
Unit
Unit Reference Number
T/600/5970
Title
Stripping and rebuilding motorsport vehicles _pre-competition_
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
64
Unit Credit Value
14
Linked Unit
Producing components using hand fitting techniques
Linked Reference Number
Not Set
Unit
Unit Reference Number
Y/600/5797
Title
Producing components using hand fitting techniques
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
64
Unit Credit Value
14
Linked Unit
Preparing and using CNC turning machines
Linked Reference Number
Not Set
Unit
Unit Reference Number
Y/600/5864
Title
Preparing and using CNC turning machines
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
64
Unit Credit Value
14
Linked Unit
Producing sheet metal components and assemblies
Linked Reference Number
Not Set
Unit
Unit Reference Number
Y/600/5878
Title
Producing sheet metal components and assemblies
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
64
Unit Credit Value
14
Linked Unit
Preparing and using manual flame brazing and bronze welding equipment
Linked Reference Number
Not Set
Unit
Unit Reference Number
Y/600/5900
Title
Preparing and using manual flame brazing and bronze welding equipment
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
61
Unit Credit Value
11
Linked Unit
Producing composite mouldings using resin infusion techniques
Linked Reference Number
Not Set
Unit
Unit Reference Number
Y/600/5945
Title
Producing composite mouldings using resin infusion techniques
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
64
Unit Credit Value
14
Linked Unit
Producing CAD models _drawings_ using a CAD system
Linked Reference Number
Not Set
Unit
Unit Reference Number
Y/600/5993
Title
Producing CAD models _drawings_ using a CAD system
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
61
Unit Credit Value
11
Compound Group
M2
Label
M2
Name
Mandatory Choices 2
Group Requirements
The learner must achieve at least 51 credits from the unit group
Minimum Credit Value
51
Maximum Credit Value
Minimum Subcomponents
3
Maximum Subcomponents
Mandatory Within Group
No
Pathway Reference
Unit Group
A
Label
A
Name
Unit Group A
Group Requirements
The learner must choose at least 1 unit in order to achieve at least 11 credits
Minimum Credit Value
11
Maximum Credit Value
Minimum Subcomponents
1
Maximum Subcomponents
Mandatory Within Group
Yes
Linked Unit
Producing mechanical engineering drawings using a CAD system
Linked Reference Number
Not Set
Unit
Unit Reference Number
J/600/5794
Title
Producing mechanical engineering drawings using a CAD system
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
61
Unit Credit Value
11
Linked Unit
Producing electrical or electronic engineering drawings using a CAD system
Linked Reference Number
Not Set
Unit
Unit Reference Number
M/600/5904
Title
Producing electrical or electronic engineering drawings using a CAD system
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
61
Unit Credit Value
11
Linked Unit
Producing CAD models _drawings_ using a CAD system
Linked Reference Number
Not Set
Unit
Unit Reference Number
Y/600/5993
Title
Producing CAD models _drawings_ using a CAD system
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
61
Unit Credit Value
11
Unit Group
B
Label
B
Name
Unit Group B
Group Requirements
The learner must choose at least 2 units in order to achieve at least 16 credits
Minimum Credit Value
16
Maximum Credit Value
Minimum Subcomponents
2
Maximum Subcomponents
Mandatory Within Group
Yes
Linked Unit
Producing engineering project plans
Linked Reference Number
Not Set
Unit
Unit Reference Number
H/600/5995
Title
Producing engineering project plans
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
37
Unit Credit Value
8
Linked Unit
Using computer software packages to assist with engineering activities
Linked Reference Number
Not Set
Unit
Unit Reference Number
K/600/5996
Title
Using computer software packages to assist with engineering activities
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
37
Unit Credit Value
8
Linked Unit
Conducting business improvement activities
Linked Reference Number
Not Set
Unit
Unit Reference Number
M/600/5997
Title
Conducting business improvement activities
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
41
Unit Credit Value
8
Unit Group
C
Label
C
Name
Unit Group C
Group Requirements
The learner must choose at least 2 units in order to achieve at least 24 credits
Minimum Credit Value
24
Maximum Credit Value
Minimum Subcomponents
2
Maximum Subcomponents
Mandatory Within Group
Yes
Linked Unit
General electrical and electronic engineering applications
Linked Reference Number
Not Set
Unit
Unit Reference Number
F/600/6006
Title
General electrical and electronic engineering applications
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
55
Unit Credit Value
12
Linked Unit
General maintenance engineering applications
Linked Reference Number
Not Set
Unit
Unit Reference Number
J/600/6007
Title
General maintenance engineering applications
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
55
Unit Credit Value
12
Linked Unit
General machining, fitting and assembly applications
Linked Reference Number
Not Set
Unit
Unit Reference Number
M/600/6003
Title
General machining, fitting and assembly applications
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
55
Unit Credit Value
12
Linked Unit
General fabrication and welding applications
Linked Reference Number
Not Set
Unit
Unit Reference Number
T/600/6004
Title
General fabrication and welding applications
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
55
Unit Credit Value
12
Compound Group
P
Label
P
Name
Pathway
Group Requirements
The learner must complete at least 1 pathway in order to achieve at least 109 credits
Minimum Credit Value
109
Maximum Credit Value
Minimum Subcomponents
1
Maximum Subcomponents
1
Mandatory Within Group
Yes
Pathway Reference
Compound Group
P1
Label
P1
Name
Manual Welding
Group Requirements
The learner must achieve at least 170 credits from the unit group
Minimum Credit Value
170
Maximum Credit Value
Minimum Subcomponents
1
Maximum Subcomponents
Mandatory Within Group
No
Pathway Reference
1
Unit Group
A
Label
A
Name
Unit Group
Group Requirements
The learner must choose at least 1 unit in order to achieve at least 170 credits
Minimum Credit Value
170
Maximum Credit Value
Minimum Subcomponents
1
Maximum Subcomponents
Mandatory Within Group
Yes
Linked Unit
Welding Materials by the Manual MIG/MAG and other Continuous Wire Processes
Linked Reference Number
Not Set
Unit
Unit Reference Number
F/601/2100
Title
Welding Materials by the Manual MIG/MAG and other Continuous Wire Processes
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 3
Unit Sub Level
None
Guided Learning Hours
322
Unit Credit Value
175
Linked Unit
Welding Pipe/Tube using Multiple Manual Arc Welding Processes
Linked Reference Number
Not Set
Unit
Unit Reference Number
F/601/2114
Title
Welding Pipe/Tube using Multiple Manual Arc Welding Processes
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 3
Unit Sub Level
None
Guided Learning Hours
329
Unit Credit Value
180
Linked Unit
Welding Plate using Multiple Manual Arc Welding Processes
Linked Reference Number
Not Set
Unit
Unit Reference Number
J/601/2115
Title
Welding Plate using Multiple Manual Arc Welding Processes
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 3
Unit Sub Level
None
Guided Learning Hours
329
Unit Credit Value
180
Linked Unit
Welding Materials by the Manual Metal Arc Process
Linked Reference Number
Not Set
Unit
Unit Reference Number
L/601/2097
Title
Welding Materials by the Manual Metal Arc Process
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 3
Unit Sub Level
None
Guided Learning Hours
322
Unit Credit Value
175
Linked Unit
Welding Materials by the Manual TIG and Plasma Arc Welding Process
Linked Reference Number
Not Set
Unit
Unit Reference Number
T/601/2109
Title
Welding Materials by the Manual TIG and Plasma Arc Welding Process
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 3
Unit Sub Level
None
Guided Learning Hours
322
Unit Credit Value
175
Linked Unit
Welding Materials by the Manual Gas Welding Process
Linked Reference Number
Not Set
Unit
Unit Reference Number
T/601/2112
Title
Welding Materials by the Manual Gas Welding Process
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 3
Unit Sub Level
None
Guided Learning Hours
308
Unit Credit Value
170
Compound Group
P2
Label
P2
Name
Welding Machine Setting and Operating
Group Requirements
The learner must achieve at least 145 credits from the unit groups
Minimum Credit Value
145
Maximum Credit Value
Minimum Subcomponents
3
Maximum Subcomponents
Mandatory Within Group
No
Pathway Reference
2
Unit Group
A
Label
A
Name
Unit Group A
Group Requirements
The learner must choose at least 2 units in order to achieve at least 80 credits
Minimum Credit Value
80
Maximum Credit Value
Minimum Subcomponents
2
Maximum Subcomponents
Mandatory Within Group
Yes
Linked Unit
Monitoring Engineering Activities
Linked Reference Number
Not Set
Unit
Unit Reference Number
D/600/5767
Title
Monitoring Engineering Activities
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 3
Unit Sub Level
None
Guided Learning Hours
106
Unit Credit Value
40
Linked Unit
Implementing Engineering Activities
Linked Reference Number
Not Set
Unit
Unit Reference Number
J/600/5763
Title
Implementing Engineering Activities
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 3
Unit Sub Level
None
Guided Learning Hours
106
Unit Credit Value
40
Linked Unit
Resolving Engineering Problems
Linked Reference Number
Not Set
Unit
Unit Reference Number
K/600/5755
Title
Resolving Engineering Problems
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 3
Unit Sub Level
None
Guided Learning Hours
96
Unit Credit Value
40
Unit Group
B
Label
B
Name
Unit Group B
Group Requirements
The learner must choose at least 1 unit in order to achieve at least 45 credits
Minimum Credit Value
45
Maximum Credit Value
Minimum Subcomponents
1
Maximum Subcomponents
Mandatory Within Group
Yes
Linked Unit
Preparing Friction Welding Machines for Production
Linked Reference Number
Not Set
Unit
Unit Reference Number
F/601/2176
Title
Preparing Friction Welding Machines for Production
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 3
Unit Sub Level
None
Guided Learning Hours
238
Unit Credit Value
65
Linked Unit
Preparing Laser Welding Machines for Production
Linked Reference Number
Not Set
Unit
Unit Reference Number
J/601/2129
Title
Preparing Laser Welding Machines for Production
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 3
Unit Sub Level
None
Guided Learning Hours
245
Unit Credit Value
70
Linked Unit
Preparing Electron Beam Welding Machines for Production
Linked Reference Number
Not Set
Unit
Unit Reference Number
K/601/2169
Title
Preparing Electron Beam Welding Machines for Production
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 3
Unit Sub Level
None
Guided Learning Hours
245
Unit Credit Value
70
Linked Unit
Preparing Brazing Machines for Production
Linked Reference Number
Not Set
Unit
Unit Reference Number
L/601/2178
Title
Preparing Brazing Machines for Production
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 3
Unit Sub Level
None
Guided Learning Hours
147
Unit Credit Value
45
Linked Unit
Preparing Mechanised Arc Welding Equipment for Production
Linked Reference Number
Not Set
Unit
Unit Reference Number
R/601/2117
Title
Preparing Mechanised Arc Welding Equipment for Production
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 3
Unit Sub Level
None
Guided Learning Hours
245
Unit Credit Value
70
Linked Unit
Preparing Resistance Spot, Seam and Projection Welding Machines for Production
Linked Reference Number
Not Set
Unit
Unit Reference Number
T/601/2126
Title
Preparing Resistance Spot, Seam and Projection Welding Machines for Production
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 3
Unit Sub Level
None
Guided Learning Hours
147
Unit Credit Value
45
Unit Group
C
Label
C
Name
Unit Group C
Group Requirements
The learner must choose at least 1 unit in order to achieve at least 20 credits
Minimum Credit Value
20
Maximum Credit Value
Minimum Subcomponents
1
Maximum Subcomponents
Mandatory Within Group
Yes
Linked Unit
Welding Materials using Laser Welding Machines
Linked Reference Number
Not Set
Unit
Unit Reference Number
H/601/1490
Title
Welding Materials using Laser Welding Machines
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
140
Unit Credit Value
37
Linked Unit
Welding Materials using Friction Welding Machines
Linked Reference Number
Not Set
Unit
Unit Reference Number
R/601/1498
Title
Welding Materials using Friction Welding Machines
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
129
Unit Credit Value
35
Linked Unit
Welding Materials using Electron Beam Welding Machines
Linked Reference Number
Not Set
Unit
Unit Reference Number
T/601/1493
Title
Welding Materials using Electron Beam Welding Machines
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
140
Unit Credit Value
37
Linked Unit
Welding Materials with Mechanised Arc Welding Equipment
Linked Reference Number
Not Set
Unit
Unit Reference Number
Y/601/1471
Title
Welding Materials with Mechanised Arc Welding Equipment
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
140
Unit Credit Value
37
Linked Unit
Welding Materials using Resistance Spot, Seam and Projection Welding Machines
Linked Reference Number
Not Set
Unit
Unit Reference Number
Y/601/1485
Title
Welding Materials using Resistance Spot, Seam and Projection Welding Machines
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
129
Unit Credit Value
35
Linked Unit
Joining Materials using Brazing Machines
Linked Reference Number
Not Set
Unit
Unit Reference Number
H/601/2199
Title
Joining Materials using Brazing Machines
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 3
Unit Sub Level
None
Guided Learning Hours
84
Unit Credit Value
20
Compound Group
P3
Label
P3
Name
Sheet Metalworking (3mm or less)
Group Requirements
The learner must achieve at least 143 credits from the unit groups
Minimum Credit Value
143
Maximum Credit Value
Minimum Subcomponents
3
Maximum Subcomponents
Mandatory Within Group
No
Pathway Reference
3
Unit Group
A
Label
A
Name
Unit Group A
Group Requirements
The learner must complete all 3 units in order to achieve 96 credits
Minimum Credit Value
96
Maximum Credit Value
Minimum Subcomponents
3
Maximum Subcomponents
Mandatory Within Group
Yes
Linked Unit
Marking Out Components for Metalwork
Linked Reference Number
Not Set
Unit
Unit Reference Number
M/601/2223
Title
Marking Out Components for Metalwork
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 3
Unit Sub Level
None
Guided Learning Hours
77
Unit Credit Value
21
Linked Unit
Cutting Sheetmetal to Shape using Hand and Machine Tools
Linked Reference Number
Not Set
Unit
Unit Reference Number
H/601/2235
Title
Cutting Sheetmetal to Shape using Hand and Machine Tools
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 3
Unit Sub Level
None
Guided Learning Hours
133
Unit Credit Value
35
Linked Unit
Forming Sheetmetal using Hand and Machine Tools
Linked Reference Number
Not Set
Unit
Unit Reference Number
K/601/2236
Title
Forming Sheetmetal using Hand and Machine Tools
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 3
Unit Sub Level
None
Guided Learning Hours
140
Unit Credit Value
40
Unit Group
B
Label
B
Name
Unit Group B
Group Requirements
The learner must choose at least 2 units in order to achieve at least 40 credits
Minimum Credit Value
40
Maximum Credit Value
Minimum Subcomponents
2
Maximum Subcomponents
Mandatory Within Group
Yes
Linked Unit
Producing Sheetmetal Assemblies
Linked Reference Number
Not Set
Unit
Unit Reference Number
A/601/2239
Title
Producing Sheetmetal Assemblies
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 3
Unit Sub Level
None
Guided Learning Hours
140
Unit Credit Value
43
Linked Unit
Developing and Marking Out Templates for Metalwork
Linked Reference Number
Not Set
Unit
Unit Reference Number
H/601/2249
Title
Developing and Marking Out Templates for Metalwork
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 3
Unit Sub Level
None
Guided Learning Hours
91
Unit Credit Value
28
Linked Unit
Heat Treating Materials for Fabrication Activities
Linked Reference Number
Not Set
Unit
Unit Reference Number
L/601/2245
Title
Heat Treating Materials for Fabrication Activities
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 3
Unit Sub Level
None
Guided Learning Hours
42
Unit Credit Value
12
Unit Group
C
Label
C
Name
Unit Group C
Group Requirements
The learner must choose at least 1 unit in order to achieve at least 7 credits
Minimum Credit Value
7
Maximum Credit Value
Minimum Subcomponents
1
Maximum Subcomponents
Mandatory Within Group
Yes
Linked Unit
Joining Fabricated Components using Mechanical Fasteners
Linked Reference Number
Not Set
Unit
Unit Reference Number
D/601/2251
Title
Joining Fabricated Components using Mechanical Fasteners
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 3
Unit Sub Level
None
Guided Learning Hours
77
Unit Credit Value
21
Linked Unit
Bonding Engineering Materials using Adhesives
Linked Reference Number
Not Set
Unit
Unit Reference Number
H/601/1960
Title
Bonding Engineering Materials using Adhesives
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
56
Unit Credit Value
14
Linked Unit
Joining Materials by Resistance Spot Welding
Linked Reference Number
Not Set
Unit
Unit Reference Number
J/601/1966
Title
Joining Materials by Resistance Spot Welding
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
35
Unit Credit Value
7
Linked Unit
Producing Fillet Welded Joints using a Manual Welding Process
Linked Reference Number
Not Set
Unit
Unit Reference Number
M/601/2254
Title
Producing Fillet Welded Joints using a Manual Welding Process
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 3
Unit Sub Level
None
Guided Learning Hours
252
Unit Credit Value
76
Compound Group
P4
Label
P4
Name
Plateworking (3mm upwards)
Group Requirements
The learner must achieve at least 118 credits from the unit groups
Minimum Credit Value
118
Maximum Credit Value
Minimum Subcomponents
4
Maximum Subcomponents
Mandatory Within Group
No
Pathway Reference
4
Unit Group
A
Label
A
Name
Unit Group A
Group Requirements
The learner must complete at least 1 unit in order to achieve at least 21 credits
Minimum Credit Value
21
Maximum Credit Value
Minimum Subcomponents
1
Maximum Subcomponents
Mandatory Within Group
Yes
Linked Unit
Developing and Marking Out Templates for Metalwork
Linked Reference Number
Not Set
Unit
Unit Reference Number
H/601/2249
Title
Developing and Marking Out Templates for Metalwork
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 3
Unit Sub Level
None
Guided Learning Hours
91
Unit Credit Value
28
Linked Unit
Marking Out Components for Metalwork
Linked Reference Number
Not Set
Unit
Unit Reference Number
M/601/2223
Title
Marking Out Components for Metalwork
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 3
Unit Sub Level
None
Guided Learning Hours
77
Unit Credit Value
21
Unit Group
B
Label
B
Name
Unit Group B
Group Requirements
The learner must choose at least 1 unit in order to achieve at least 13 credits
Minimum Credit Value
13
Maximum Credit Value
Minimum Subcomponents
1
Maximum Subcomponents
Mandatory Within Group
Yes
Linked Unit
Cutting Plate and Sections using Shearing Machines
Linked Reference Number
Not Set
Unit
Unit Reference Number
T/601/2255
Title
Cutting Plate and Sections using Shearing Machines
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 3
Unit Sub Level
None
Guided Learning Hours
91
Unit Credit Value
28
Linked Unit
Cutting and Shaping Materials using Portable Thermal Cutting Equipment
Linked Reference Number
Not Set
Unit
Unit Reference Number
J/601/2258
Title
Cutting and Shaping Materials using Portable Thermal Cutting Equipment
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 3
Unit Sub Level
None
Guided Learning Hours
133
Unit Credit Value
35
Linked Unit
Cutting Materials using Saws and Abrasive Discs
Linked Reference Number
Not Set
Unit
Unit Reference Number
M/601/1993
Title
Cutting Materials using Saws and Abrasive Discs
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
42
Unit Credit Value
13
Unit Group
C
Label
C
Name
Unit Group C
Group Requirements
The learner must choose at least 2 units in order to achieve at least 49 credits
Minimum Credit Value
49
Maximum Credit Value
Minimum Subcomponents
2
Maximum Subcomponents
Mandatory Within Group
Yes
Linked Unit
Producing Platework Assemblies
Linked Reference Number
Not Set
Unit
Unit Reference Number
H/601/2266
Title
Producing Platework Assemblies
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 3
Unit Sub Level
None
Guided Learning Hours
133
Unit Credit Value
35
Linked Unit
Bending and Forming Plate using Press Brakes or Bending Machines
Linked Reference Number
Not Set
Unit
Unit Reference Number
J/601/2261
Title
Bending and Forming Plate using Press Brakes or Bending Machines
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 3
Unit Sub Level
None
Guided Learning Hours
133
Unit Credit Value
35
Linked Unit
Forming Platework using Power Rolling Machines
Linked Reference Number
Not Set
Unit
Unit Reference Number
L/601/2262
Title
Forming Platework using Power Rolling Machines
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 3
Unit Sub Level
None
Guided Learning Hours
133
Unit Credit Value
35
Linked Unit
Producing and Finishing Holes using Drilling Machines
Linked Reference Number
Not Set
Unit
Unit Reference Number
Y/601/2264
Title
Producing and Finishing Holes using Drilling Machines
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 3
Unit Sub Level
None
Guided Learning Hours
56
Unit Credit Value
14
Unit Group
D
Label
D
Name
Unit Group D
Group Requirements
The learner must choose at least 2 units in order to achieve at least 35 credits
Minimum Credit Value
35
Maximum Credit Value
Minimum Subcomponents
2
Maximum Subcomponents
Mandatory Within Group
Yes
Linked Unit
Joining Fabricated Components using Mechanical Fasteners
Linked Reference Number
Not Set
Unit
Unit Reference Number
D/601/2251
Title
Joining Fabricated Components using Mechanical Fasteners
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 3
Unit Sub Level
None
Guided Learning Hours
77
Unit Credit Value
21
Linked Unit
Slinging, Lifting and Moving Materials and Components
Linked Reference Number
Not Set
Unit
Unit Reference Number
K/601/2270
Title
Slinging, Lifting and Moving Materials and Components
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 3
Unit Sub Level
None
Guided Learning Hours
56
Unit Credit Value
14
Linked Unit
Producing Fillet Welded Joints using a Manual Welding Process
Linked Reference Number
Not Set
Unit
Unit Reference Number
M/601/2254
Title
Producing Fillet Welded Joints using a Manual Welding Process
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 3
Unit Sub Level
None
Guided Learning Hours
252
Unit Credit Value
76
Compound Group
P5
Label
P5
Name
Structural Steelwork
Group Requirements
The learner must achieve at least 111 credits from the unit groups
Minimum Credit Value
111
Maximum Credit Value
Minimum Subcomponents
4
Maximum Subcomponents
Mandatory Within Group
No
Pathway Reference
5
Unit Group
A
Label
A
Name
Unit Group A
Group Requirements
The learner must choose at least 1 unit in order to achieve at least 21 credits
Minimum Credit Value
21
Maximum Credit Value
Minimum Subcomponents
1
Maximum Subcomponents
Mandatory Within Group
Yes
Linked Unit
Marking Out Components for Metalwork
Linked Reference Number
Not Set
Unit
Unit Reference Number
M/601/2223
Title
Marking Out Components for Metalwork
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 3
Unit Sub Level
None
Guided Learning Hours
77
Unit Credit Value
21
Linked Unit
Developing and Marking Out Templates for Metalwork
Linked Reference Number
Not Set
Unit
Unit Reference Number
H/601/2249
Title
Developing and Marking Out Templates for Metalwork
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 3
Unit Sub Level
None
Guided Learning Hours
91
Unit Credit Value
28
Unit Group
B
Label
B
Name
Unit Group B
Group Requirements
The learner must choose at least 1 unit in order to achieve at least 13 credits
Minimum Credit Value
13
Maximum Credit Value
Minimum Subcomponents
1
Maximum Subcomponents
Mandatory Within Group
Yes
Linked Unit
Cutting and Shaping Materials using Portable Thermal Cutting Equipment
Linked Reference Number
Not Set
Unit
Unit Reference Number
J/601/2258
Title
Cutting and Shaping Materials using Portable Thermal Cutting Equipment
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 3
Unit Sub Level
None
Guided Learning Hours
133
Unit Credit Value
35
Linked Unit
Cutting Plate and Sections using Shearing Machines
Linked Reference Number
Not Set
Unit
Unit Reference Number
T/601/2255
Title
Cutting Plate and Sections using Shearing Machines
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 3
Unit Sub Level
None
Guided Learning Hours
91
Unit Credit Value
28
Linked Unit
Cutting Materials using Saws and Abrasive Discs
Linked Reference Number
Not Set
Unit
Unit Reference Number
M/601/1993
Title
Cutting Materials using Saws and Abrasive Discs
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
42
Unit Credit Value
13
Unit Group
C
Label
C
Name
Unit Group C
Group Requirements
The learner must choose at least 2 units in order to achieve at least 42 credits
Minimum Credit Value
42
Maximum Credit Value
Minimum Subcomponents
2
Maximum Subcomponents
Mandatory Within Group
Yes
Linked Unit
Producing Major Structural Components/Sub-assemblies
Linked Reference Number
Not Set
Unit
Unit Reference Number
F/601/2274
Title
Producing Major Structural Components/Sub-assemblies
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 3
Unit Sub Level
None
Guided Learning Hours
140
Unit Credit Value
40
Linked Unit
Forming Structural Sections using Machines
Linked Reference Number
Not Set
Unit
Unit Reference Number
M/601/2271
Title
Forming Structural Sections using Machines
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 3
Unit Sub Level
None
Guided Learning Hours
133
Unit Credit Value
35
Linked Unit
Producing Structural Steel Ancillary Components
Linked Reference Number
Not Set
Unit
Unit Reference Number
T/601/2272
Title
Producing Structural Steel Ancillary Components
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 3
Unit Sub Level
None
Guided Learning Hours
98
Unit Credit Value
28
Linked Unit
Producing and Finishing Holes using Drilling Machines
Linked Reference Number
Not Set
Unit
Unit Reference Number
Y/601/2264
Title
Producing and Finishing Holes using Drilling Machines
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 3
Unit Sub Level
None
Guided Learning Hours
56
Unit Credit Value
14
Unit Group
D
Label
D
Name
Unit Group D
Group Requirements
The learner must choose at least 2 units in order to achieve at least 35 credits
Minimum Credit Value
35
Maximum Credit Value
Minimum Subcomponents
2
Maximum Subcomponents
Mandatory Within Group
Yes
Linked Unit
Joining Fabricated Components using Mechanical Fasteners
Linked Reference Number
Not Set
Unit
Unit Reference Number
D/601/2251
Title
Joining Fabricated Components using Mechanical Fasteners
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 3
Unit Sub Level
None
Guided Learning Hours
77
Unit Credit Value
21
Linked Unit
Erecting Structural Steelwork
Linked Reference Number
Not Set
Unit
Unit Reference Number
H/601/2283
Title
Erecting Structural Steelwork
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 3
Unit Sub Level
None
Guided Learning Hours
140
Unit Credit Value
40
Linked Unit
Slinging, Lifting and Moving Materials and Components
Linked Reference Number
Not Set
Unit
Unit Reference Number
K/601/2270
Title
Slinging, Lifting and Moving Materials and Components
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 3
Unit Sub Level
None
Guided Learning Hours
56
Unit Credit Value
14
Linked Unit
Producing Fillet Welded Joints using a Manual Welding Process
Linked Reference Number
Not Set
Unit
Unit Reference Number
M/601/2254
Title
Producing Fillet Welded Joints using a Manual Welding Process
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 3
Unit Sub Level
None
Guided Learning Hours
252
Unit Credit Value
76
Compound Group
P6
Label
P6
Name
Pipe and Tube Fabrication
Group Requirements
The learner must achieve at least 109 credits from the unit groups
Minimum Credit Value
109
Maximum Credit Value
Minimum Subcomponents
4
Maximum Subcomponents
Mandatory Within Group
No
Pathway Reference
6
Unit Group
A
Label
A
Name
Unit Group A
Group Requirements
The learner must choose at least 1 unit in order to achieve at least 21 credits
Minimum Credit Value
21
Maximum Credit Value
Minimum Subcomponents
1
Maximum Subcomponents
Mandatory Within Group
Yes
Linked Unit
Developing and Marking Out Templates for Metalwork
Linked Reference Number
Not Set
Unit
Unit Reference Number
H/601/2249
Title
Developing and Marking Out Templates for Metalwork
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 3
Unit Sub Level
None
Guided Learning Hours
91
Unit Credit Value
28
Linked Unit
Marking Out Components for Metalwork
Linked Reference Number
Not Set
Unit
Unit Reference Number
M/601/2223
Title
Marking Out Components for Metalwork
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 3
Unit Sub Level
None
Guided Learning Hours
77
Unit Credit Value
21
Unit Group
B
Label
B
Name
Unit Group B
Group Requirements
The learner must choose at least 1 unit in order to achieve at least 13 credits
Minimum Credit Value
13
Maximum Credit Value
Minimum Subcomponents
1
Maximum Subcomponents
Mandatory Within Group
Yes
Linked Unit
Bonding Engineering Materials using Adhesives
Linked Reference Number
Not Set
Unit
Unit Reference Number
H/601/1960
Title
Bonding Engineering Materials using Adhesives
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
56
Unit Credit Value
14
Linked Unit
Cutting Materials using Saws and Abrasive Discs
Linked Reference Number
Not Set
Unit
Unit Reference Number
M/601/1993
Title
Cutting Materials using Saws and Abrasive Discs
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
42
Unit Credit Value
13
Linked Unit
Cutting and Shaping Materials using Portable Thermal Cutting Equipment
Linked Reference Number
Not Set
Unit
Unit Reference Number
J/601/2258
Title
Cutting and Shaping Materials using Portable Thermal Cutting Equipment
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 3
Unit Sub Level
None
Guided Learning Hours
133
Unit Credit Value
35
Unit Group
C
Label
C
Name
Unit Group C
Group Requirements
The learner must choose at least 2 units in order to achieve at least 54 credits
Minimum Credit Value
54
Maximum Credit Value
Minimum Subcomponents
2
Maximum Subcomponents
Mandatory Within Group
Yes
Linked Unit
Producing Pipe Fabrications
Linked Reference Number
Not Set
Unit
Unit Reference Number
D/601/2296
Title
Producing Pipe Fabrications
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 3
Unit Sub Level
None
Guided Learning Hours
140
Unit Credit Value
40
Linked Unit
Producing and Finishing Holes using Drilling Machines
Linked Reference Number
Not Set
Unit
Unit Reference Number
Y/601/2264
Title
Producing and Finishing Holes using Drilling Machines
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 3
Unit Sub Level
None
Guided Learning Hours
56
Unit Credit Value
14
Linked Unit
Forming Pipework by Machine Bending
Linked Reference Number
Not Set
Unit
Unit Reference Number
Y/601/2295
Title
Forming Pipework by Machine Bending
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 3
Unit Sub Level
None
Guided Learning Hours
140
Unit Credit Value
40
Unit Group
D
Label
D
Name
Unit Group D
Group Requirements
The learner must choose at least 1 unit in order to achieve at least 21 credits
Minimum Credit Value
21
Maximum Credit Value
Minimum Subcomponents
1
Maximum Subcomponents
Mandatory Within Group
Yes
Linked Unit
Producing Socket and Flange Fillet Welded Joints in Pipe using a Manual Welding Process
Linked Reference Number
Not Set
Unit
Unit Reference Number
K/601/2298
Title
Producing Socket and Flange Fillet Welded Joints in Pipe using a Manual Welding Process
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 3
Unit Sub Level
None
Guided Learning Hours
210
Unit Credit Value
86
Linked Unit
Joining Fabricated Components using Mechanical Fasteners
Linked Reference Number
Not Set
Unit
Unit Reference Number
D/601/2251
Title
Joining Fabricated Components using Mechanical Fasteners
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 3
Unit Sub Level
None
Guided Learning Hours
77
Unit Credit Value
21
Barred Units
There are no barred units to display.
Qualification Objectives
ObjectiveResponse
GCSEs priortised to measure school and/or teacher performanceNot Set
Other GCSEsNot Set
Other level 1, 2 and1/2 qualifications used to indicate learners' attainment on completion of compulsory schooling and included in measures of school and/or teacher performanceNot Set
GCEs and ASNot Set
Other level 3 qualifications designed to demonstrate eligibility for progression to higher education and/or used to measure school or college performanceNot Set
ESOL qualifications that are required for citizenshipNot Set
Qualifications that indicate an individual can undertake a specific role in the workplace and that may be relied upon by employersNot Set
Qualifications that an individual is required by law to have gained in order to undertake a specific roleNot Set
Qualifications taken primarily for growth and enjoymentNot Set
Qualifications that are designed to meet the needs of a named employer or other organisationNot Set
Qualifications that are included within apprenticeships frameworks, including functional skillsNot Set
View Performance Measures | View ASL | Print Details | Print Details with Units
2.1.3.0L