Cymraeg | Contact Us | About Us | Accessibility | Help
Advanced search
Ofqual Logo DfES Logo CCEA Logo
The Register of Regulated Qualifications

View Qualification : EAL Level 2 NVQ Diploma in Fabrication and Welding Engineering (QCF)

Qualification
Qualification Number
501/1278/8
Title
EAL Level 2 NVQ Diploma in Fabrication and Welding Engineering (QCF)
Awarding Organisation
Excellence, Achievement & Learning Limited
Fees Price List Url
Qualification Type
QCF
Qualification Sub Type
None
Qualification Level
Level 2
Qualification Sub Level
None
EQF Level
Level 3
Regulation Start Date
01-Sep-2010
Operational Start Date
01-Sep-2010
Operational End Date
30-Jun-2013
Certification End Date
31-May-2015
Offered In England
Yes
Offered In Wales
Yes
Offered In Northern Ireland
Yes
Assessment Language In English
Yes
Assessment Language In Welsh
Yes
Assessment Language In Irish
Yes
SSA
4.1 Engineering
Purpose
D. Confirm occupational competence and/or 'licence to practice'
Sub Purpose
D1. Confirm competence in an occupational role to the standards required
Total Credits
47
Min Credits at/above Level
47
Minimum Guided Learning Hours
214
Maximum Guided Learning Hours
604
Diploma Guided Learning Hours
214
Barring Classification Code
ZZZZ
Overall Grading Type
Pass
Assessment Methods
Portfolio of Evidence
Exemptions
N/A
Structure Requirements
Learners must complete all units in Group A (15 Credits), and a number of optional and mandatory units from Group B (depending on their chosen pathway) to achieve a minimum of (47 credits). For full details contact EMTA Awards Limited.
The awarding organisation states that this qualification is appropriate for use in the following age ranges.
Age Ranges
Pre-16 : No; 16-18 : Yes; 18+ : No; 19+ : Yes
Further information
This does not imply that eligibility for funding has been agreed for these age ranges.
For further information on the funding of 14-19 qualifications offered in England, please refer to the DFE Section 96 website.
For further information on the funding of 19+ qualifications offered in England, please refer to the SFA website.
For further information on funding in Wales, visit the DAQW website.
For further information on funding in Northern Ireland, visit the DELNI and DENI website.
When undertaking a qualification that does not appear on the governments' lists as eligible for funding for specific age ranges, users must be aware of the legal requirements around activities undertaken by learners of specific ages.
Compound Group
A
Label
A
Name
Structure for Fabrication and Welding Engineering Level 2
Group Requirements
All 3 mandatory units must be taken to achieve 15 credits (Group A) and then a pathway of their choice from (Group B) to gain at least 47 credits to gain this qualification.
Minimum Credit Value
47
Maximum Credit Value
Minimum Subcomponents
2
Maximum Subcomponents
Mandatory Within Group
Yes
Pathway Reference
Unit Group
A1
Label
A1
Name
Mandatory Units
Group Requirements
Mandatory Units relevant to all pathways
Minimum Credit Value
15
Maximum Credit Value
15
Minimum Subcomponents
3
Maximum Subcomponents
3
Mandatory Within Group
Yes
Linked Unit
Complying with statutory regulations and organisational safety requirements
Linked Reference Number
Not Set
Unit
Unit Reference Number
A/601/5013
Title
Complying with statutory regulations and organisational safety requirements
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
35
Unit Credit Value
5
Linked Unit
Using and interpreting engineering data and documentation
Linked Reference Number
Not Set
Unit
Unit Reference Number
Y/601/5102
Title
Using and interpreting engineering data and documentation
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
25
Unit Credit Value
5
Linked Unit
Working efficiently and effectively in engineering
Linked Reference Number
Not Set
Unit
Unit Reference Number
Y/601/5052
Title
Working efficiently and effectively in engineering
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
25
Unit Credit Value
5
Compound Group
B
Label
B
Name
Pathways
Group Requirements
All learners must choose at least one pathway to achieve a minimum of 47 credits to achieve the Level 2 Fabrication and Welding qualification
Minimum Credit Value
32
Maximum Credit Value
Minimum Subcomponents
1
Maximum Subcomponents
1
Mandatory Within Group
Yes
Pathway Reference
Unit Group
B1
Label
B1
Name
Manual Welding
Group Requirements
Learner must complete at least one unit from this pathway for a minimum of 44 Credits
Minimum Credit Value
44
Maximum Credit Value
Minimum Subcomponents
1
Maximum Subcomponents
Mandatory Within Group
No
Linked Unit
Joining Materials by the Manual Metal Arc Welding Process
Linked Reference Number
Not Set
Unit
Unit Reference Number
F/601/1447
Title
Joining Materials by the Manual Metal Arc Welding Process
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
196
Unit Credit Value
54
Linked Unit
Joining Materials by the Manual MIG/MAG and Other Continuous Wire Processes
Linked Reference Number
Not Set
Unit
Unit Reference Number
J/601/1451
Title
Joining Materials by the Manual MIG/MAG and Other Continuous Wire Processes
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
196
Unit Credit Value
54
Linked Unit
Joining Materials by the Manual TIG and Plasma-arc Welding Processes
Linked Reference Number
Not Set
Unit
Unit Reference Number
K/601/1457
Title
Joining Materials by the Manual TIG and Plasma-arc Welding Processes
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
196
Unit Credit Value
54
Linked Unit
Joining Materials by the Manual Gas Welding Process
Linked Reference Number
Not Set
Unit
Unit Reference Number
T/601/1459
Title
Joining Materials by the Manual Gas Welding Process
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
175
Unit Credit Value
50
Linked Unit
Producing Fillet Welded Joints using a Manual Welding Process
Linked Reference Number
Not Set
Unit
Unit Reference Number
L/601/1466
Title
Producing Fillet Welded Joints using a Manual Welding Process
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
169
Unit Credit Value
44
Unit Group
B2
Label
B2
Name
Welding Machine Operating
Group Requirements
Learner must complete at least one unit from this pathway for a minimum of 35 credits
Minimum Credit Value
35
Maximum Credit Value
Minimum Subcomponents
1
Maximum Subcomponents
Mandatory Within Group
No
Linked Unit
Welding Materials with Mechanised Arc Welding Equipment
Linked Reference Number
Not Set
Unit
Unit Reference Number
Y/601/1471
Title
Welding Materials with Mechanised Arc Welding Equipment
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
140
Unit Credit Value
37
Linked Unit
Welding Materials using Resistance Spot, Seam and Projection Welding Machines
Linked Reference Number
Not Set
Unit
Unit Reference Number
Y/601/1485
Title
Welding Materials using Resistance Spot, Seam and Projection Welding Machines
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
129
Unit Credit Value
35
Linked Unit
Welding Materials using Laser Welding Machines
Linked Reference Number
Not Set
Unit
Unit Reference Number
H/601/1490
Title
Welding Materials using Laser Welding Machines
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
140
Unit Credit Value
37
Linked Unit
Welding Materials using Electron Beam Welding Machines
Linked Reference Number
Not Set
Unit
Unit Reference Number
T/601/1493
Title
Welding Materials using Electron Beam Welding Machines
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
140
Unit Credit Value
37
Linked Unit
Welding Materials using Friction Welding Machines
Linked Reference Number
Not Set
Unit
Unit Reference Number
R/601/1498
Title
Welding Materials using Friction Welding Machines
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
129
Unit Credit Value
35
Unit Group
B3
Label
B3
Name
Brazing and Soldering
Group Requirements
Learner must complete this unit to gain 35 credits.
Minimum Credit Value
35
Maximum Credit Value
35
Minimum Subcomponents
1
Maximum Subcomponents
1
Mandatory Within Group
No
Linked Unit
Joining Materials by Manual Torch Brazing and Soldering
Linked Reference Number
Not Set
Unit
Unit Reference Number
H/601/1912
Title
Joining Materials by Manual Torch Brazing and Soldering
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
129
Unit Credit Value
35
Compound Group
B4
Label
B4
Name
Sheet Metalwork (3mm or less)
Group Requirements
Learner must complete at least 2 units from the following pathway to gain a minimum of 25 credits
Minimum Credit Value
25
Maximum Credit Value
Minimum Subcomponents
2
Maximum Subcomponents
Mandatory Within Group
No
Pathway Reference
4
Unit Group
a)
Label
a)
Name
Optional Units Group A
Group Requirements
The learner must choose two from this group
Minimum Credit Value
25
Maximum Credit Value
Minimum Subcomponents
2
Maximum Subcomponents
Mandatory Within Group
Yes
Linked Unit
Marking Out Components for Fabrication
Linked Reference Number
Not Set
Unit
Unit Reference Number
J/601/1921
Title
Marking Out Components for Fabrication
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
63
Unit Credit Value
15
Linked Unit
Cutting Sheet Metal to Shape using Hand and Machine Tools
Linked Reference Number
Not Set
Unit
Unit Reference Number
Y/601/1924
Title
Cutting Sheet Metal to Shape using Hand and Machine Tools
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
133
Unit Credit Value
28
Linked Unit
Forming Sheet Metal using Hand and Machine Tools
Linked Reference Number
Not Set
Unit
Unit Reference Number
D/601/1925
Title
Forming Sheet Metal using Hand and Machine Tools
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
133
Unit Credit Value
28
Linked Unit
Producing Sheet Metal Assemblies
Linked Reference Number
Not Set
Unit
Unit Reference Number
M/601/1931
Title
Producing Sheet Metal Assemblies
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
119
Unit Credit Value
35
Linked Unit
Heat Treating Materials for Fabrication Activities
Linked Reference Number
Not Set
Unit
Unit Reference Number
F/601/1934
Title
Heat Treating Materials for Fabrication Activities
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
56
Unit Credit Value
10
Linked Unit
Cutting and Shaping Materials using NC/CNC Laser Profiling Machines
Linked Reference Number
Not Set
Unit
Unit Reference Number
R/601/1937
Title
Cutting and Shaping Materials using NC/CNC Laser Profiling Machines
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
154
Unit Credit Value
37
Linked Unit
Cutting and Shaping using NC/CNC Plasma or Gas Cutting Machines
Linked Reference Number
Not Set
Unit
Unit Reference Number
J/601/1949
Title
Cutting and Shaping using NC/CNC Plasma or Gas Cutting Machines
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
154
Unit Credit Value
37
Unit Group
b)
Label
b)
Name
Optional Units Group B
Group Requirements
The learner must choose one unit from this Group
Minimum Credit Value
7
Maximum Credit Value
Minimum Subcomponents
1
Maximum Subcomponents
Mandatory Within Group
Yes
Linked Unit
Assembling Components using Mechanical Fasteners
Linked Reference Number
Not Set
Unit
Unit Reference Number
F/601/1951
Title
Assembling Components using Mechanical Fasteners
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
70
Unit Credit Value
18
Linked Unit
Bonding Engineering Materials using Adhesives
Linked Reference Number
Not Set
Unit
Unit Reference Number
H/601/1960
Title
Bonding Engineering Materials using Adhesives
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
56
Unit Credit Value
14
Linked Unit
Joining Materials by Resistance Spot Welding
Linked Reference Number
Not Set
Unit
Unit Reference Number
J/601/1966
Title
Joining Materials by Resistance Spot Welding
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
35
Unit Credit Value
7
Linked Unit
Slinging, Lifting and Moving Materials and Components
Linked Reference Number
Not Set
Unit
Unit Reference Number
Y/601/1969
Title
Slinging, Lifting and Moving Materials and Components
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
56
Unit Credit Value
14
Linked Unit
Joining Materials by the Manual MIG/MAG and Other Continuous Wire Processes
Linked Reference Number
Not Set
Unit
Unit Reference Number
J/601/1451
Title
Joining Materials by the Manual MIG/MAG and Other Continuous Wire Processes
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
196
Unit Credit Value
54
Linked Unit
Joining Materials by the Manual TIG and Plasma-arc Welding Processes
Linked Reference Number
Not Set
Unit
Unit Reference Number
K/601/1457
Title
Joining Materials by the Manual TIG and Plasma-arc Welding Processes
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
196
Unit Credit Value
54
Linked Unit
Joining Materials by the Manual Gas Welding Process
Linked Reference Number
Not Set
Unit
Unit Reference Number
T/601/1459
Title
Joining Materials by the Manual Gas Welding Process
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
175
Unit Credit Value
50
Compound Group
B5
Label
B5
Name
Plateworker (3mm upwards)
Group Requirements
Learner muct complete one mandatory unit plus a selection of optionals from the relevant groups
Minimum Credit Value
52
Maximum Credit Value
Minimum Subcomponents
4
Maximum Subcomponents
Mandatory Within Group
No
Pathway Reference
5
Unit Group
c)
Label
c)
Name
Optional Units Group C
Group Requirements
The learner must choose this unit
Minimum Credit Value
15
Maximum Credit Value
15
Minimum Subcomponents
1
Maximum Subcomponents
1
Mandatory Within Group
Yes
Linked Unit
Marking Out Components for Fabrication
Linked Reference Number
Not Set
Unit
Unit Reference Number
J/601/1921
Title
Marking Out Components for Fabrication
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
63
Unit Credit Value
15
Unit Group
d)
Label
d)
Name
Optional Units Group D
Group Requirements
The learner must choose one unit from this Group
Minimum Credit Value
13
Maximum Credit Value
Minimum Subcomponents
1
Maximum Subcomponents
Mandatory Within Group
No
Linked Unit
Cutting Plate and Sections using Shearing Machines
Linked Reference Number
Not Set
Unit
Unit Reference Number
D/601/1973
Title
Cutting Plate and Sections using Shearing Machines
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
98
Unit Credit Value
21
Linked Unit
Cutting Materials using Hand Operated Thermal Cutting Equipment
Linked Reference Number
Not Set
Unit
Unit Reference Number
A/601/1978
Title
Cutting Materials using Hand Operated Thermal Cutting Equipment
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
133
Unit Credit Value
28
Linked Unit
Cutting and Shaping Materials using Gas Cutting Machines
Linked Reference Number
Not Set
Unit
Unit Reference Number
K/601/1992
Title
Cutting and Shaping Materials using Gas Cutting Machines
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
133
Unit Credit Value
28
Linked Unit
Cutting Materials using Saws and Abrasive Discs
Linked Reference Number
Not Set
Unit
Unit Reference Number
M/601/1993
Title
Cutting Materials using Saws and Abrasive Discs
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
42
Unit Credit Value
13
Linked Unit
Cutting and Shaping Materials using NC/CNC Laser Profiling Machines
Linked Reference Number
Not Set
Unit
Unit Reference Number
R/601/1937
Title
Cutting and Shaping Materials using NC/CNC Laser Profiling Machines
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
154
Unit Credit Value
37
Linked Unit
Cutting and Shaping using NC/CNC Plasma or Gas Cutting Machines
Linked Reference Number
Not Set
Unit
Unit Reference Number
J/601/1949
Title
Cutting and Shaping using NC/CNC Plasma or Gas Cutting Machines
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
154
Unit Credit Value
37
Unit Group
e)
Label
e)
Name
Optional Units Group E
Group Requirements
the learner must choose one unit from this Group
Minimum Credit Value
10
Maximum Credit Value
Minimum Subcomponents
1
Maximum Subcomponents
Mandatory Within Group
No
Linked Unit
Bending and Forming Plate using Power Operated Machines
Linked Reference Number
Not Set
Unit
Unit Reference Number
F/601/1996
Title
Bending and Forming Plate using Power Operated Machines
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
133
Unit Credit Value
28
Linked Unit
Forming Platework using Power Rolling Machines
Linked Reference Number
Not Set
Unit
Unit Reference Number
J/601/1997
Title
Forming Platework using Power Rolling Machines
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
133
Unit Credit Value
28
Linked Unit
Producing Platework Assemblies
Linked Reference Number
Not Set
Unit
Unit Reference Number
L/601/1998
Title
Producing Platework Assemblies
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
133
Unit Credit Value
30
Linked Unit
Producing Holes using Drilling Machines
Linked Reference Number
Not Set
Unit
Unit Reference Number
R/601/1999
Title
Producing Holes using Drilling Machines
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
49
Unit Credit Value
10
Unit Group
f)
Label
f)
Name
Optional Units Group F
Group Requirements
The learner must choose one unit from this Group
Minimum Credit Value
14
Maximum Credit Value
Minimum Subcomponents
1
Maximum Subcomponents
Mandatory Within Group
No
Linked Unit
Assembling Components using Mechanical Fasteners
Linked Reference Number
Not Set
Unit
Unit Reference Number
F/601/1951
Title
Assembling Components using Mechanical Fasteners
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
70
Unit Credit Value
18
Linked Unit
Producing Fillet Welded Joints using a Manual Welding Process
Linked Reference Number
Not Set
Unit
Unit Reference Number
L/601/1466
Title
Producing Fillet Welded Joints using a Manual Welding Process
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
169
Unit Credit Value
44
Linked Unit
Welding Materials with Mechanised Arc Welding Equipment
Linked Reference Number
Not Set
Unit
Unit Reference Number
Y/601/1471
Title
Welding Materials with Mechanised Arc Welding Equipment
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
140
Unit Credit Value
37
Linked Unit
Slinging, Lifting and Moving Materials and Components
Linked Reference Number
Not Set
Unit
Unit Reference Number
Y/601/1969
Title
Slinging, Lifting and Moving Materials and Components
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
56
Unit Credit Value
14
Compound Group
B6
Label
B6
Name
Structural Steelwork
Group Requirements
Learners must choose a mandatory unit plus optional units from the relevant groups
Minimum Credit Value
52
Maximum Credit Value
Minimum Subcomponents
2
Maximum Subcomponents
Mandatory Within Group
No
Pathway Reference
6
Unit Group
g)
Label
g)
Name
Optional Units Group G
Group Requirements
The learner must choose this unit
Minimum Credit Value
15
Maximum Credit Value
15
Minimum Subcomponents
1
Maximum Subcomponents
1
Mandatory Within Group
Yes
Linked Unit
Marking Out Components for Fabrication
Linked Reference Number
Not Set
Unit
Unit Reference Number
J/601/1921
Title
Marking Out Components for Fabrication
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
63
Unit Credit Value
15
Unit Group
h)
Label
h)
Name
Optional Units Group H
Group Requirements
The learner must choose one unit from this group
Minimum Credit Value
13
Maximum Credit Value
Minimum Subcomponents
1
Maximum Subcomponents
Mandatory Within Group
No
Linked Unit
Cutting Plate and Sections using Shearing Machines
Linked Reference Number
Not Set
Unit
Unit Reference Number
D/601/1973
Title
Cutting Plate and Sections using Shearing Machines
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
98
Unit Credit Value
21
Linked Unit
Cutting Materials using Hand Operated Thermal Cutting Equipment
Linked Reference Number
Not Set
Unit
Unit Reference Number
A/601/1978
Title
Cutting Materials using Hand Operated Thermal Cutting Equipment
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
133
Unit Credit Value
28
Linked Unit
Cutting and Shaping Materials using Gas Cutting Machines
Linked Reference Number
Not Set
Unit
Unit Reference Number
K/601/1992
Title
Cutting and Shaping Materials using Gas Cutting Machines
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
133
Unit Credit Value
28
Linked Unit
Cutting Materials using Saws and Abrasive Discs
Linked Reference Number
Not Set
Unit
Unit Reference Number
M/601/1993
Title
Cutting Materials using Saws and Abrasive Discs
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
42
Unit Credit Value
13
Unit Group
i)
Label
i)
Name
Optional Units Group I
Group Requirements
The learner must choose at least two from this Group
Minimum Credit Value
24
Maximum Credit Value
Minimum Subcomponents
2
Maximum Subcomponents
Mandatory Within Group
No
Linked Unit
Producing Holes using Drilling Machines
Linked Reference Number
Not Set
Unit
Unit Reference Number
R/601/1999
Title
Producing Holes using Drilling Machines
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
49
Unit Credit Value
10
Linked Unit
Forming Structural Sections using Machines
Linked Reference Number
Not Set
Unit
Unit Reference Number
F/601/2002
Title
Forming Structural Sections using Machines
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
119
Unit Credit Value
35
Linked Unit
Producing Structural Steel Ancillary Components
Linked Reference Number
Not Set
Unit
Unit Reference Number
R/601/2005
Title
Producing Structural Steel Ancillary Components
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
111
Unit Credit Value
24
Linked Unit
Assembling Components using Mechanical Fasteners
Linked Reference Number
Not Set
Unit
Unit Reference Number
F/601/1951
Title
Assembling Components using Mechanical Fasteners
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
70
Unit Credit Value
18
Linked Unit
Producing Fillet Welded Joints using a Manual Welding Process
Linked Reference Number
Not Set
Unit
Unit Reference Number
L/601/1466
Title
Producing Fillet Welded Joints using a Manual Welding Process
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
169
Unit Credit Value
44
Linked Unit
Welding Materials with Mechanised Arc Welding Equipment
Linked Reference Number
Not Set
Unit
Unit Reference Number
Y/601/1471
Title
Welding Materials with Mechanised Arc Welding Equipment
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
140
Unit Credit Value
37
Linked Unit
Assembling Structural Steelwork
Linked Reference Number
Not Set
Unit
Unit Reference Number
D/601/2007
Title
Assembling Structural Steelwork
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
119
Unit Credit Value
35
Linked Unit
Slinging, Lifting and Moving Materials and Components
Linked Reference Number
Not Set
Unit
Unit Reference Number
Y/601/1969
Title
Slinging, Lifting and Moving Materials and Components
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
56
Unit Credit Value
14
Compound Group
B7
Label
B7
Name
Pipework Fabrication
Group Requirements
Learner must choose a mandatory unit together with optional units from relevant groups
Minimum Credit Value
52
Maximum Credit Value
Minimum Subcomponents
3
Maximum Subcomponents
Mandatory Within Group
No
Pathway Reference
7
Unit Group
j)
Label
j)
Name
Optional Units Group J
Group Requirements
The learner must choose this unit
Minimum Credit Value
15
Maximum Credit Value
15
Minimum Subcomponents
1
Maximum Subcomponents
1
Mandatory Within Group
Yes
Linked Unit
Marking Out Components for Fabrication
Linked Reference Number
Not Set
Unit
Unit Reference Number
J/601/1921
Title
Marking Out Components for Fabrication
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
63
Unit Credit Value
15
Unit Group
k)
Label
k)
Name
Optional Units Group K
Group Requirements
The learner must choose one unti from this Group
Minimum Credit Value
13
Maximum Credit Value
Minimum Subcomponents
1
Maximum Subcomponents
Mandatory Within Group
No
Linked Unit
Cutting Materials using Hand Operated Thermal Cutting Equipment
Linked Reference Number
Not Set
Unit
Unit Reference Number
A/601/1978
Title
Cutting Materials using Hand Operated Thermal Cutting Equipment
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
133
Unit Credit Value
28
Linked Unit
Cutting and Shaping Materials using Gas Cutting Machines
Linked Reference Number
Not Set
Unit
Unit Reference Number
K/601/1992
Title
Cutting and Shaping Materials using Gas Cutting Machines
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
133
Unit Credit Value
28
Linked Unit
Cutting Materials using Saws and Abrasive Discs
Linked Reference Number
Not Set
Unit
Unit Reference Number
M/601/1993
Title
Cutting Materials using Saws and Abrasive Discs
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
42
Unit Credit Value
13
Unit Group
l)
Label
l)
Name
Optional Units Group L
Group Requirements
The learner must choose two units from this Group
Minimum Credit Value
24
Maximum Credit Value
Minimum Subcomponents
2
Maximum Subcomponents
Mandatory Within Group
No
Linked Unit
Producing Holes using Drilling Machines
Linked Reference Number
Not Set
Unit
Unit Reference Number
R/601/1999
Title
Producing Holes using Drilling Machines
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
49
Unit Credit Value
10
Linked Unit
Forming Pipework by Machine Bending
Linked Reference Number
Not Set
Unit
Unit Reference Number
D/601/2010
Title
Forming Pipework by Machine Bending
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
126
Unit Credit Value
35
Linked Unit
Assembling Components using Mechanical Fasteners
Linked Reference Number
Not Set
Unit
Unit Reference Number
F/601/1951
Title
Assembling Components using Mechanical Fasteners
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
70
Unit Credit Value
18
Linked Unit
Bonding Engineering Materials using Adhesives
Linked Reference Number
Not Set
Unit
Unit Reference Number
H/601/1960
Title
Bonding Engineering Materials using Adhesives
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
56
Unit Credit Value
14
Unit Group
B8
Label
B8
Name
Composite Fabrication
Group Requirements
Learners must choose 2 units from this Group
Minimum Credit Value
46
Maximum Credit Value
Minimum Subcomponents
2
Maximum Subcomponents
Mandatory Within Group
No
Linked Unit
Producing Composite Mouldings using Wet Lay-up Techniques
Linked Reference Number
Not Set
Unit
Unit Reference Number
A/601/2015
Title
Producing Composite Mouldings using Wet Lay-up Techniques
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
151
Unit Credit Value
42
Linked Unit
Producing Composite Mouldings using Pre-Preg Laminating Techniques
Linked Reference Number
Not Set
Unit
Unit Reference Number
D/601/2038
Title
Producing Composite Mouldings using Pre-Preg Laminating Techniques
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
151
Unit Credit Value
42
Linked Unit
Produce Components by Acrylic Moulding
Linked Reference Number
Not Set
Unit
Unit Reference Number
D/601/2041
Title
Produce Components by Acrylic Moulding
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
130
Unit Credit Value
32
Linked Unit
Vacuum Forming Composite Materials
Linked Reference Number
Not Set
Unit
Unit Reference Number
F/601/2047
Title
Vacuum Forming Composite Materials
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
130
Unit Credit Value
32
Linked Unit
Trimming Composite Mouldings using Hand Tools
Linked Reference Number
Not Set
Unit
Unit Reference Number
D/601/2055
Title
Trimming Composite Mouldings using Hand Tools
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
130
Unit Credit Value
32
Linked Unit
Identifying Defects in Composite Mouldings
Linked Reference Number
Not Set
Unit
Unit Reference Number
A/601/2063
Title
Identifying Defects in Composite Mouldings
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
95
Unit Credit Value
23
Linked Unit
Applying Surface Finishes to Composite Mouldings
Linked Reference Number
Not Set
Unit
Unit Reference Number
Y/601/2068
Title
Applying Surface Finishes to Composite Mouldings
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
130
Unit Credit Value
32
Linked Unit
Bonding Composite Mouldings
Linked Reference Number
Not Set
Unit
Unit Reference Number
R/601/2070
Title
Bonding Composite Mouldings
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
95
Unit Credit Value
23
Linked Unit
Producing Composite Assemblies
Linked Reference Number
Not Set
Unit
Unit Reference Number
H/601/2073
Title
Producing Composite Assemblies
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
151
Unit Credit Value
42
Unit Group
B9
Label
B9
Name
Thermal Cutting
Group Requirements
Learner must choose 2 units from this Group
Minimum Credit Value
56
Maximum Credit Value
Minimum Subcomponents
2
Maximum Subcomponents
Mandatory Within Group
No
Linked Unit
Cutting Materials using Hand Operated Thermal Cutting Equipment
Linked Reference Number
Not Set
Unit
Unit Reference Number
A/601/1978
Title
Cutting Materials using Hand Operated Thermal Cutting Equipment
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
133
Unit Credit Value
28
Linked Unit
Cutting and Shaping Materials using Gas Cutting Machines
Linked Reference Number
Not Set
Unit
Unit Reference Number
K/601/1992
Title
Cutting and Shaping Materials using Gas Cutting Machines
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
133
Unit Credit Value
28
Linked Unit
Cutting and Shaping Materials using NC/CNC Laser Profiling Machines
Linked Reference Number
Not Set
Unit
Unit Reference Number
R/601/1937
Title
Cutting and Shaping Materials using NC/CNC Laser Profiling Machines
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
154
Unit Credit Value
37
Linked Unit
Cutting and Shaping using NC/CNC Plasma or Gas Cutting Machines
Linked Reference Number
Not Set
Unit
Unit Reference Number
J/601/1949
Title
Cutting and Shaping using NC/CNC Plasma or Gas Cutting Machines
Organisation Name
Science, Engineering and Manufacturing Technologies Alliance
Unit Level
Level 2
Unit Sub Level
None
Guided Learning Hours
154
Unit Credit Value
37
Barred Units
There are no barred units to display.
Qualification Objectives
ObjectiveResponse
GCSEs priortised to measure school and/or teacher performanceNot Set
Other GCSEsNot Set
Other level 1, 2 and1/2 qualifications used to indicate learners' attainment on completion of compulsory schooling and included in measures of school and/or teacher performanceNot Set
GCEs and ASNot Set
Other level 3 qualifications designed to demonstrate eligibility for progression to higher education and/or used to measure school or college performanceNot Set
ESOL qualifications that are required for citizenshipNot Set
Qualifications that indicate an individual can undertake a specific role in the workplace and that may be relied upon by employersNot Set
Qualifications that an individual is required by law to have gained in order to undertake a specific roleNot Set
Qualifications taken primarily for growth and enjoymentNot Set
Qualifications that are designed to meet the needs of a named employer or other organisationNot Set
Qualifications that are included within apprenticeships frameworks, including functional skillsNot Set
View Performance Measures | View ASL | Print Details | Print Details with Units
2.1.3.0L